Model NO.: Angle 20 x 20, 25x25, 30x30, 50x50 Forging Forming Method: Mold Forging Feature: High Efficiency Warranty: 12 Months Advantage: Use Widely Name: Furring Channel Machine, Main Channel Machine Side Board Thickness: 18mm Power Supply: 380V 50-60Hz Shaft Material: Carbon Steel 45# Rolling Wheel Material: Bearing Steel Gr15 with Forging and Annealing Trademark: DX Origin: Botou Hebei China Type:
Rolling Machine Power Source: Hydraulic Pressure Certification: CCC, SGS, ISO9001, CE Customized: Customized Condition: New Main Frame: 400mm H-Sections Steel Main Motor Power: 7.5kw Shaft Number: 15 Rows Shaft Diameter: 80mm Cutting Method: Hydraulic Mould Cutting or Sawed off with Punching Specification: DX 20*20-50*50 HS Code: 845522 Furring Channel Machine, Main Channel Machine
Producing process of furring channel machine:
Decoiler -active feeding-forming -caculate length --automatic cutting --product
Detailed specification of furring channel machine:
1. Manual inner tight decoiler with brake
A. Coil inner diameter 450mm-550mm
B. Maximum width of coiling600mm
C. Maximum weight of loading 2500kg
2. Main
Forming MachineA. Number of forming steps 10rows
B. Material of shaft 45# steel. Outer diameter 50mm
C. Main motor power: 4kw
D. The speed of forming: 3-50m/min
3. Hydraulic cutting and punching device
A. Material of blade: Cr12 mould steel with quenched treatment 60-62
B. Cutting system: Adopt advanced hydraulic drive, after forming automatic cut, no distort, no wasting, high safe factor. (tracking cutting)
High quality Punching device and cutter
4. The electrical control system
A. The Brand of display: DELTA
B. The main computer (PLC): DELTA DVP14
Delta computer (touch screen)
5. Hydraulic system
A. Adopting advanced hydraulic system of Tai Wan
B. Power: 3kw
6. The equipments coating, package
A. The coating adopt international general shade-guide
B. The package: Simple waterproof package.
7. The spare parts of the equipment.
A. The element of easy damaging: Contactor conk: 2 unit, fuse: 4 set
B. The hydraulic sealing up cushion: 1set
C. Bolt spanner: 1 set
The picture of whole machine
Material specification | Galvanized and pre-painted galvanized steel. |
Thickness | 0.3 mm to 0.7mm. |
Main motor power | 7.5 kw. |
Hydraulic station power | 5.5 kw. |
Feeding width | 124mm. |
Cover width | 60mm. |
Yield stress | 235Mpa(33KSI) ~ 345Mpa (50KSI). |
Roll forming Speed | 12 m/minute. |
Cutting Tolerance | ±2mm |
Manual Uncoiler | Max. Capacity: 5000kgs. |
Voltage | As per customer's request. |
Numbers of stands | 13 stands/stations/pairs. |
Roller material | 45# steel polished and coated with chrome HRC55-60° |
Shaft diameter | 70mm |
Shaft diameter | high grade No.45 steel after treatment |
Type of cutting | Roll-formed and length-set profile cutting. |
Contact us if you need more details on Channel Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Forming Machine、Roll Forming. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Auto uncoiler&Stacker