Find Corrugated Roll Forming Machine, Roof Forming Machine, Metal Forming Machine on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Roof &Wall Roll Forming Machine > Roofing Tile Cold Roll Forming Machine with PLC Control System

Roofing Tile Cold Roll Forming Machine with PLC Control System

Payment Type: L/C, T/T, D/P, Western Union
Min. Order: 1

Basic Info

Model No.:  DX840/825

Product Description

Model NO.: DX840/825 Forging Forming Method: Mold Forging Feature: Automation Warranty: 12 Months Advantage: Easy to Maintenance Name: Roofing Tile Cold Roll Forming Machine with PLC Co Material Thickness: 0.3-0.8mm Feeding Width: 1000mm Pump Power: 3 Kw Forming Steps: Upper Level Is 13 Steps, Down Level 15 Steps Trademark: DIXIN Origin: Botou Hebei China Type: Rolling Machine Power Source: Hydraulic Pressure Certification: CCC, SGS, ISO9001, CE Customized: Customized Condition: New Processing Material: Aluzinc/Galvanized Steel/Colored Steel Coil Effective Width: 840mm&850mm Main Motor Power: 4 Kw Shaft Diameter: 75mm Roller Material: 45# Forged Steel, with Hard Chrome Plating Specification: DX840&850 HS Code: 845522 Roofing tile cold Roll Forming Machine with PLC control system

1. Introduce for double layer cold roll Forming Machine
This machine is perfectly combined two different-model machines together, this can save the space and also is easy to operate.

2. Technique parameters
(1) Processing material: Aluzinc/galvanized steel/colored steel coil
(2) Material thickness: 0.3-0.8mm
(3) Effective width: 840mm&850mm
(4) Feeding width: 1000mm
(5) Main motor power: 4 kw
(6) Pump power: 4kw
(7) Shaft diameter: 75mm
(8) Forming steps: Upper level is 13 steps, down level 15 steps
(9) Roller material: 45# forged steel, with hard chrome plating
(10) Main frame: 300H steel
(11) Medium plate thickness: 16mm
(12) Control systerm: PLC computer control with inverter
(13) Power supply: 380V, 3 Phase, 50Hz
(14) 0veral sized: 6500mm*1500mm*1300mm

3. Components of line
1. Decoiler 2 units
2. Roll Forming System 1 unit
3. Cutting Device 1 unit
4. Hydraulic Station 1 unit
5. PLC control system 1 unit
6. Runout table 1 unit

4. The structure of machine
1 set of manual decoiler

Single head;
Max. Capacity: 5000kg;
Coil inner-diameter: 508mm
1 set of main roll forming machines
Steps: 13
Roller Material: 45# steel
Voltage: 380V/50Hz.

Line speed: 12m/min;
Rolling chromium thickness: 0.05 mm
1 set of computer control cabinet
It adopts Taida PLC to control. The target piece length is adjustable and digit of it can be adjusted.
5.7 inch touch screen, easy to operate

Computed mode has two modes: Automatic and manual one.
1 set of hydraulic System
It is controlled by gear wheel oil pump. After filling the hydraulic oil into the hydraulic oil tank, the pump drive the cutter machine to begin the cutting job.
Match equipment: A set of hydraulic tank, a set of hydraulic oil pump, two hydraulic pipes and two sets of electromagnetism valves.
Power of the oil pump: 3kw Hydraulic oil: 40#
1 set of cutting mechanism
It adopts hydraulic drive and automatic location to decide the dimention and cut the target products.
Match equipment: One set of cutting tool, one hydraulic tank, one cutter machine.
Stop to cut, Post cut cutting length tolerance: ± 2mm
Cutting tool material: GCr12 with quenched treatment 60-62° C
1 set of counter
One counter gauges length, pulses, and decides length
1 set of output table
It used to load the forming plate
Model number DX 840&850 Double Deck Truss Making Machine
Rolled material 0.3-0.8mm thickness, aluminium sheet, galvanized sheet, colored steel sheet and various steel plates
Effective width 840mm&850mm
Feeding width 1000mm
Forming steps upper level is 11 steps, down level 13 steps
Roller 45# forged steel, hard chrome plating within 0.05mm
Diameter of shaft 70mm
Main frame 300H steel
Main motor power 3 kw
Pump power 3 kw
Medium plate thickness 14mm
Sprocket chain  1 inch
Drive  type by chain
Cutting Blade Cr12, heat treatment 60-62°C
Frequency Converter  It has the advantage of slowing down before cutting, to ensure the length accuracy (±1mm, far better than industrial standard ±3mm).

Contact us if you need more details on Roof Forming Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Roll Forming Machinery、Metal Forming Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Roof &Wall Roll Forming Machine

Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters