Model No.: 950
Sandwich panel is a compound line, contain roll forming machine and sandwich panel rolling system. The whole line is controlled by the PLC control center.
The material is steel sheet coil, its thickness can be 0.4-0.6mm, width can be 1250mm, the hydraulic strength ≤235Mp. The stuffing is EPS or Rock Wool.
|Technical Parameters||Sandwich panel size: |
Thickness: as per the drawing
Steel sheet coil size:Stuffing material: EPS
The max weight: 5T
Inner diameter of coil: 500mm and 600mm
Outer diameter of coil: 1000mm
Stuffing material: EPS
Density≥18kg/m3, tolerance of straight≤1mm/m, arched tolerance≤3mm/m, Level tolerance≤ 1.5mm, EPS panel length≥3m.
Stuffing material: Rock wool
Density≥100kg/m3, Rock wool panel length≥3m.
Processing speed: 1000-3000mm/min (The speed can be adjusted)
The length of the whole line: 40m
The available Length of sandwich panel: 7.5m
Control center: PLC
Power of main motor: 40kw
Power source: 380V/3phase/50 Hz
Air pressure: 0.7MP (you can control by yourself)
The best working temperature: 25oC.
Material of roller: C45steel hard chrome plating
Material of blade: Cr12
|Main moter power||32KW|
|out line dimension of machine||33m*2.5m*2.5m|
|the thickness of upper steell plate||0.3-0.8mm|
|the feeding width of upper steel plate||1000/1200/1250mm|
|the thickness of lower steel plate||0.3-0.8mm|
|the feeding width of lower steel plate||1000/1200/1250mm|
|the width of stocket board||950/1150mm|
|the width of H board||1000/1200mm|
Product Categories : Sandwhich Panel Forming Machine Line